How to Flash New Firmware on Samsung GALAXY GRAND PRIME DUOS With ODIN v3.11.1

Flash Stock Firmware Samsung GALAXY GRAND PRIME DUOS. These device Also known as SSamsung Galaxy Grand Prime Duos TV G530BT, This post below will explain you how to Flash or Install a new Firmware on Samsung GALAXY GRAND PRIME DUOS With ODIN v3.11.1. We highly recommend you using Samsung’s own utilities OTA (Over-the-air) or Samsung Kies to upgrade your software device. Use this guide only if you sure 99,99% about risks involved in flashing your Samsung GALAXY GRAND PRIME DUOS device.

This device is released on 2014, October. Samsung GALAXY GRAND PRIME DUOS is the smartphone with 5,0 Inches TFT capacitive touchscreen, 16M colors, work on Android OS, v4.4.2 (KitKat), Powered by Quad-core 1.2 GHz Cortex-A53 CPU, Qualcomm MSM8916 Snapdragon 410 chipset, Adreno 306 GPU, combined with 1 GB of RAM and 8 MP of  Main camera and 5 MP on secondary camera. 

Prerequisite.

Below is the following things you must do before flashing your Android Samsung GALAXY GRAND PRIME DUOS device.

1. Make sure your Samsung GALAXY GRAND PRIME DUOS is fully charged. or minimum has 89% of battery capacity. It will avoid the flashing failure process.
2. Flashing process will delete or wipe all data stored in internal memory. So, don't forget to backup all data before flashing device.
3. Make sure you have installed a latest of the Samsung driver, that support with your device, If you don't have, you can download here 
4. Original USB cable driver for your Samsung GALAXY GRAND PRIME DUOS.
5. Download Odin V3.11.1, Here. 
6. Firmware Download. (use one of the 3 methods below to download Samsung Firmware)
• One. Download Official firmware file for the model number of your device, download it from - SamMobile, or you can visit samsung-updates.com/
• Two. Guide How to Download Official Samsung Firmware From SamMobile. Here 
• Three. Firmware Samsung GALAXY GRAND PRIME DUOS, you must Log In to download firmware via this link.
• SM-G531BT - Brazil - Here 

Guide To Flash Samsung GALAXY GRAND PRIME DUOS 

1. You must download all necessary file.(Samsung USB driver and Odin)
2. Then, install all driver to your computer or PC.
3. Extract Odin V3.11.1. file on the destination folder.
4. Switch Off your Samsung GALAXY GRAND PRIME DUOS to start flashing process.
5. Then, run Odin3 v3.11.1 by right click on Odin.exe and select Run as Administrator.

   

   Flash Stock Firmware On Samsung GALAXY GRAND PRIME DUOS

6. When program is running, now you can click AP, and navigate to the *.tar or *.tar.md5 firmware file. 

   

   Flash Stock Firmware On Samsung GALAXY GRAND PRIME DUOS

7. Now your firmware file has been inserted in Odin3 

   

   Flash Stock Firmware On Samsung GALAXY GRAND PRIME DUOS

8. Then, Enter download mode your Samsung GALAXY GRAND PRIME DUOS. See this guide how to do it. 
9. On this mode, now connect your Samsung GALAXY GRAND PRIME DUOS to your PC / laptop using a USB cable. 
10. After your phone connected, you will see a message appear that show your device added and there is info on the ID: COM at top left corner. Keep in mind for this COM vary depending on the PC / Laptop. Just Ignore all, in this picture you will see that your device is detected on (COM 5)

    

    Port Com Samsung GALAXY GRAND PRIME DUOS

11. Make sure re-partition is NOT ticked
12. When everything already you can click Start Button. at the bottom left corner
13. Just wait for the process to run about 2-5 minutes, and make sure there is no interference in this process. 
14. When complete it will display a notification PASS and your smartphone Samsung GALAXY GRAND PRIME DUOS will automatically restart.
15. Wait your device to boot up, it will take a while.
16. When your Samsung GALAXY GRAND PRIME DUOS is ready to use, now check your firmware version. See this guide how to check it. 
17. Finish.