Flash / Install Firmware Samsung GALAXY S III MINI Using ODIN v3.11.1 | Full Guide.
Flash Stock Firmware Samsung GALAXY S III MINI . This device Also known as Also known as Samsung I8200 Galaxy S III mini Value Edition, I8200 Galaxy S3 mini, Now guidebelajar will show you guide to flash or install a new firmware on Samsung GALAXY S III MINI Using ODIN v3.11.1. We recommend using Samsung’s own utilities, Samsung Kies and OTA (Over-the-air) to upgrade your software. Use this guide if you are 999% sure about the risks involved in flashing your device. We are not responsible for any damage caused by following this guide.
This device is released on 2014, March. Samsung GALAXY S III MINI is the smartphone with 4.0 Super AMOLED capacitive touchscreen, 16M colors, work on Android OS, v4.2.2 (Jelly Bean), Supported with 1.2 GHz dual-core Cortex-A9 CPU, combined with 1000 MB of RAM and 5 MP of Main camera and VGA on secondary camera.
This device is released on 2014, March. Samsung GALAXY S III MINI is the smartphone with 4.0 Super AMOLED capacitive touchscreen, 16M colors, work on Android OS, v4.2.2 (Jelly Bean), Supported with 1.2 GHz dual-core Cortex-A9 CPU, combined with 1000 MB of RAM and 5 MP of Main camera and VGA on secondary camera.
Prerequisite.
Below is the following things you must do before flashing your Android Samsung Smartphone device.
- Make sure your Samsung GALAXY S III MINI is fully charged. or minimum has 78 % of battery capacity. It will avoid the flashing process failure.
- Flashing process will wipe or delete all data stored in internal memory. So, you must always to backup all data before flashing device.
- Make sure you have installed a latest of the Samsung driver, that support with your device, If you don't have, you can download here
- Original USB cable driver for your Samsung GALAXY S III MINI .
- Download Odin V3.11.1, Here
- Download Official firmware file for the model number of your device, download it from - SamMobile, or you can visit samsung-updates.com/
- Or you can read Guide How to Download Official Samsung Firmware From SamMobile. Here
- Firmware Samsung GALAXY S III MINI, you must Log In to download firmware via this link.
- GT-I8200 - South East Europe, Bulgaria, Open Austria, Italy Iran, South Africa, Saudi Arabia, Pakistan, Afghanistan, Uzbekistan, Ukraine, Romania, Greece, Libya, tunisia, Egypt, Morocco, Poland, Rusia (Here)
- GT-I8200L - Argentina, Trinidad, Tobago, Colombia, Panama, Brazil, Costa Rica, Argentina, Peru, Panama, (Here)
- GT-I8200N - Netherlands, Slovakia, Portugal, Czech Republic, Hungary, Luxembourg, Belgium, Switzerland, Ireland, Germany, United Kingdom, Portugal, (Here)
- GT-I8200Q - Turkey- (Here)
Guide To Flash Samsung GALAXY S III MINI
- You must download all necessary file.(Samsung USB driver and Odin)
- Then, install all driver to your computer or PC.
- Extract Odin V3.11.1. file on the destination folder.
- Switch Off your Samsung GALAXY S III MINI to start flashing process.
- Then, run Odin3 v3.11.1 by right click on Odin.exe and select Run as Administrator.
Flash Stock Firmware On Samsung GALAXY S III MINI - When program is running, now you can click AP, and navigate to the *.tar or *.tar.md5 firmware file.
Flash Stock Firmware On Samsung GALAXY S III MINI - Now your firmware file has been inserted in Odin3
- Then, Enter download mode your Samsung GALAXY S III MINI . See this guide how to do it.
- On this mode, now connect your Samsung GALAXY S III MINI to your PC / laptop using a USB cable.
- After your phone connected, you will see a message appear that show your device added and there is info on the ID: COM at top left corner. Keep in mind for this COM vary depending on the PC / Laptop. Just Ignore all, in this picture you will see that your device is detected on (COM 5)
Port Com Samsung GALAXY S III MINI - Make sure re-partition is NOT ticked
- When everything already you can click Start Button. at the bottom left corner
- Just wait for the process to run about 2-5 minutes, and make sure there is no interference in this process.
- When complete it will display a notification PASS and your smartphone Samsung GALAXY S III MINI will automatically restart.
- Wait your device to boot up, it will take a while.
- When your Samsung GALAXY S III MINI is ready to use, now check your firmware version. See this guide how to check it.
- Finish.
Warning.
Never disconnect the USB cable while flashing process is running.Install Samsung Mobile Driver or Samsung Smart Switch if you don't see a sign in Odin.
Flash your Samsung GALAXY S III MINI device at your own risk.
Flashing firmware which contains more than one *.tar.md5 file will wipe all data on internal storage. Flashing official/stock firmware won't increase the binary flash nor KNOX WARRANTY VOID counter and won't cancel the Samsung GALAXY S III MINI device's warranty.
ليست هناك تعليقات:
إرسال تعليق