Everything You Need to Know About Flashing Samsung device with ODIN.
Read this instruction below carefully when you flashing or Installing a new firmware into Samsung Android smartphone, cause it will avoid a failure or damage your Samsung device. There are some warning you should avoid it.
- Download only a Samsung firmware from the official website.
- Download ODIN (Samsung Flash Tool) from the trusted site.
- If you don't see a sign in Odin, Make sure Samsung Mobile Driver or Samsung Smart Switch installed correctly on your computer,
- Always use original USB cable to connect your Samsung device to the computer.
- Never disconnect or Unplug the USB cable while flashing process is running. it will brick your Samsung device !
- Do Not Check "Nand Erase All" in any way !
- It is recommended to make factory reset or hard reset after flashing to have a fresh official firmware.
- Flashing firmware which contains more than one *.tar.md5 file will wipe all data on internal storage.
- Flashing official/stock firmware won't increase the binary flash nor KNOX WARRANTY VOID counter and won't cancel the Samsung device's warranty.
- Flash your Samsung device at your own risk.
ODIN Troubleshooting.
If you see an error when running ODIN try the following options below.
- Try to Repeat all procedure from the beginning
- Change to the other USB port.
- Try to use another USB cable (make sure it is the original).
- Try to download and install another Odin version.
- Try to Uninstall and re-install driver on your computer
- Try to download another Samsung firmware from trusted site
- Try to use another computer, maybe your current computer infected by virus.
Use ODIN software if you are 99% sure what is the risks involved in flashing your Samsung device, Guidebelajar recommend using Samsung’s own utilities, Samsung Smart Switch and OTA (Over-the-air), to upgrade devices
ليست هناك تعليقات:
إرسال تعليق